1.In the use of the second-line magnetic switch, it is necessary to connect the load before it can be used, otherwise it will cause the magnetic switch burning due to too much current. 2. When using DC power, the Brown is to be connected to the high potential (+), the Blue line is connected to the low potential (-), otherwise the LED will not light. If the wiring is not the case above, and will not damage the magnetic switch, as long as the two wiring switch, the indicator light can be normal instructions.
Cautions in Application of F.R.L Equipment: 1. cautions in installation. Clean the pipes before installation of pneumatic components associated，Remove dust、oil、debris、etc.to prevent the fragments of sealing material mix.
Order
Online Consultation
0574-63976868
浙公網安備 33028202000497號